We use cookies in order to personalize your site experience.
Shop
DS18B20 Temperature Sensor
45,00 EGP- Digital temperature sensor with 1-wire interface
- Measures temperatures from –55°C to +125°C
- High accuracy ±0.5°C over a wide range
- Requires only one data line for communication
- Can connect multiple sensors on a single bus
- Waterproof versions available for outdoor use
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
275,00 EGP- Adjustable sensing range: 3 cm to 80 cm
- Digital NPN output (normally open)
- Operates at 5V DC with low current consumption
- Fast response time (<2 ms)
- Compact and easy to install
- Ideal for obstacle detection and automation applications
Electromagnet Solenoid Lock 10mm 12V 600mA
300,00 EGP- 10mm Stroke Length: Retracts pin when powered
- 12V DC Operation: Low-power with 600mA current draw
- Strong Holding Force: Ideal for electronic door locks
- Durable Metal Build: Reliable for cabinets, lockers, and access systems
- Quick Response: Fast locking/unlocking for automation projects
ESC (Speed Controller for Brushless Motor) 30A with Bare Wires
450,00 EGP-
30A Current Rating for medium-power brushless motors
-
Supports 2S–4S LiPo Batteries (typically 7.4V–14.8V)
-
Bare Wire Connections for flexible wiring and soldering
-
High-Speed Response for smooth throttle control
-
Compact & Lightweight ideal for drones, RC planes, and DIY robotics
ESC 30A Brushless Speed Controller
475,00 EGP-
30A continuous / 40A burst current
-
Supports 2–4S LiPo or 5–12 cell NiMH/NiCd
-
Built-in 5V/2A BEC
-
Pre-soldered T-type (Deans) and 3.5mm bullet connectors
-
Programmable brake, timing, and voltage cutoff
-
Overheat, signal loss, and low voltage protection
-
Smooth throttle response and easy calibration
ESP-01S 5V WiFi Relay Module for Smart Home Control
65,00 EGP- ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
- Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
- Diode effusion protection.
- Short response time
ESP32 D1 Mini – Dual Core WiFi Bluetooth Module
350,00 EGP- Dual-core ESP32 @ 240MHz
- Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
- Compact D1 Mini form factor
- 4MB Flash memory
- Supports Arduino IDE and MicroPython
ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)
380,00 EGP-
Dual-Core ESP32 Processor with WiFi and Bluetooth support
-
38 GPIO Pins for versatile connectivity
-
Type-C USB Port for fast and reliable power/data
-
Built-in Flash & Antenna for wireless applications
-
Ideal for IoT, Smart Devices, and Embedded Projects
ESP32 Development Board CH9102X WiFi+Bluetooth
400,00 EGP- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
- Frequency: 2.4 GHz.
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
700,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
ESP8266 NodeMCU CP2102 Board
275,00 EGP- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Essential Components List for Learning Digital Logic Circuits
91,00 EGPEssential Components List for Learning Digital Logic Circuits
|
40,00 EGP
|
|
|
......
|
|
|
......
|
91,00 EGP
In stock
Etching Solution Acid (125mL)
40,00 EGP-
Ready-to-use etching acid for copper-clad PCB boards
-
Delivers clean and effective copper removal
-
Suitable for DIY electronics, prototyping, and metal etching
-
Compact 125mL sealed plastic bottle
-
Easy to handle and store with proper safety precautions
-
Also usable for artistic metal etching applications
F/F – 10cm Female to Female 1 Jumper Wire
0,75 EGP- Female-to-Female connectors – compatible with 2.54mm male headers
- Length: 10cm – compact and flexible for tight spaces
- Ideal for breadboards and dev boards – Arduino, Raspberry Pi, sensors, modules
- Durable build – copper conductor with strong PVC insulation
- Plug-and-play convenience – no soldering needed
- Reusable and flexible – perfect for rapid prototyping
- Secure grip – solid crimp for reliable connectivity
- Versatile use – great for DIY kits, testing, and learning electronics
F/F – 30cm Female to Female 1 Jumper Wire
1,50 EGP- 📏 Extended 30cm length – perfect for spaced-out circuits
- 🔗 Female-to-Female connectors – fits standard 2.54mm male headers
- ⚙️ Ideal for Arduino, Raspberry Pi, and breadboards
- 🔁 Durable, reusable, and easy to connect – no soldering needed
- 🧪 Great for prototyping, testing, and educational use
- 🔋 Flexible PVC insulation with copper conductors
Female 2.1*5.5mm for DC Power Jack Adapter Connector Plug
10,00 EGP- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
Flux JYD Soldering Paste 150G
25,00 EGP- Strong, clean, and reliable solder joints
- Neutral pH (7 ± 0.3), non-corrosive and safe
- Low-residue formula – no cleaning needed
- Excellent insulation and heat transfer
- Long shelf life – won’t dry out easily
- Ideal for electronics, PCB repair, and fine-pitch soldering
