Shop

DS18B20 Temperature Sensor

45,00 EGP
  • Digital temperature sensor with 1-wire interface
  • Measures temperatures from –55°C to +125°C
  • High accuracy ±0.5°C over a wide range
  • Requires only one data line for communication
  • Can connect multiple sensors on a single bus
  • Waterproof versions available for outdoor use
  • Compatible with Arduino, Raspberry Pi, and other microcontrollers
Add to cart

E18-D80NK Adjustable Infrared Sensor Switch 3-80cm

275,00 EGP
  • Adjustable sensing range: 3 cm to 80 cm
  • Digital NPN output (normally open)
  • Operates at 5V DC with low current consumption
  • Fast response time (<2 ms)
  • Compact and easy to install
  • Ideal for obstacle detection and automation applications
Add to cart

Electromagnet Solenoid Lock 10mm 12V 600mA

300,00 EGP
  • 10mm Stroke Length: Retracts pin when powered
  • 12V DC Operation: Low-power with 600mA current draw
  • Strong Holding Force: Ideal for electronic door locks
  • Durable Metal Build: Reliable for cabinets, lockers, and access systems
  • Quick Response: Fast locking/unlocking for automation projects
Add to cart

Electromagnet Solenoid Lock 5mm 12VDC 350mA

220,00 EGP
Add to cart

ESC (Speed Controller for Brushless Motor) 30A with Bare Wires

450,00 EGP
  • 30A Current Rating for medium-power brushless motors

  • Supports 2S–4S LiPo Batteries (typically 7.4V–14.8V)

  • Bare Wire Connections for flexible wiring and soldering

  • High-Speed Response for smooth throttle control

  • Compact & Lightweight ideal for drones, RC planes, and DIY robotics

Add to cart

ESC 30A Brushless Speed Controller

475,00 EGP
  • 30A continuous / 40A burst current

  • Supports 2–4S LiPo or 5–12 cell NiMH/NiCd

  • Built-in 5V/2A BEC

  • Pre-soldered T-type (Deans) and 3.5mm bullet connectors

  • Programmable brake, timing, and voltage cutoff

  • Overheat, signal loss, and low voltage protection

  • Smooth throttle response and easy calibration

Add to cart

ESP-01 ESP8266 Serial WiFi Module

110,00 EGP
Add to cart

ESP-01S 5V WiFi Relay Module for Smart Home Control

65,00 EGP
  • ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
  • Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
  • Diode effusion protection.
  • Short response time
Add to cart

ESP32 D1 Mini – Dual Core WiFi Bluetooth Module

350,00 EGP
  • Dual-core ESP32 @ 240MHz
  • Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
  • Compact D1 Mini form factor
  • 4MB Flash memory
  • Supports Arduino IDE and MicroPython
Add to cart

ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)

380,00 EGP
  • Dual-Core ESP32 Processor with WiFi and Bluetooth support

  • 38 GPIO Pins for versatile connectivity

  • Type-C USB Port for fast and reliable power/data

  • Built-in Flash & Antenna for wireless applications

  • Ideal for IoT, Smart Devices, and Embedded Projects

Add to cart

ESP32 Development Board CH9102X WiFi+Bluetooth

400,00 EGP
  1. Ultra-low-power management.
  2. 4 MB Flash.
  3. Current: 80 mA.
  4. Supply Voltage: 3.0 V ~ 3.6 V.
  5. Data Rate: 150 Mbps.
  6. Frequency: 2.4 GHz.
Add to cart

ESP32-CAM-WROVER Dual-Core WiFi Module with Camera

700,00 EGP
  • Built-in ESP32 Dual-Core WiFi + Bluetooth
  • Includes OV2640 2MP Camera
  • Supports image streaming & face detection
  • Ultra-low-power design
  • No microSD card slot
  • Compatible with Arduino IDE & ESP-IDF
  • Ideal for IoT, AI vision, and surveillance projects
Add to cart

ESP8266 NodeMCU CP2102 Board

275,00 EGP
  • ESP8266 Wi-Fi microcontroller with 4MB flash
  • Built-in CP2102 USB-to-serial converter
  • Supports Arduino IDE and Lua scripting
  • 3.3V logic with onboard voltage regulator
  • Multiple GPIO pins with PWM, I2C, SPI
  • Compact and easy to program via USB
Add to cart

Etching Solution Acid (125mL)

40,00 EGP
  • Ready-to-use etching acid for copper-clad PCB boards

  • Delivers clean and effective copper removal

  • Suitable for DIY electronics, prototyping, and metal etching

  • Compact 125mL sealed plastic bottle

  • Easy to handle and store with proper safety precautions

  • Also usable for artistic metal etching applications

Add to cart

F/F – 10cm Female to Female 1 Jumper Wire

0,75 EGP
  • Female-to-Female connectors – compatible with 2.54mm male headers
  • Length: 10cm – compact and flexible for tight spaces
  • Ideal for breadboards and dev boards – Arduino, Raspberry Pi, sensors, modules
  • Durable build – copper conductor with strong PVC insulation
  • Plug-and-play convenience – no soldering needed
  • Reusable and flexible – perfect for rapid prototyping
  • Secure grip – solid crimp for reliable connectivity
  • Versatile use – great for DIY kits, testing, and learning electronics
Add to cart

F/F – 30cm Female to Female 1 Jumper Wire

1,50 EGP
  • 📏 Extended 30cm length – perfect for spaced-out circuits
  • 🔗 Female-to-Female connectors – fits standard 2.54mm male headers
  • ⚙️ Ideal for Arduino, Raspberry Pi, and breadboards
  • 🔁 Durable, reusable, and easy to connect – no soldering needed
  • 🧪 Great for prototyping, testing, and educational use
  • 🔋 Flexible PVC insulation with copper conductors
Add to cart

Female 2.1*5.5mm for DC Power Jack Adapter Connector Plug

10,00 EGP
  1. It is a perfect solution for those who want to make custom power cable.
  2. This CCTV Camera DC Power Connector will provide a great connection.
  3. The internal diameter of the plug: 2.1mm
  4. The external diameter of the plug: 5.5mm
Add to cart

Flux JYD Soldering Paste 150G

25,00 EGP
  • Strong, clean, and reliable solder joints
  • Neutral pH (7 ± 0.3), non-corrosive and safe
  • Low-residue formula – no cleaning needed
  • Excellent insulation and heat transfer
  • Long shelf life – won’t dry out easily
  • Ideal for electronics, PCB repair, and fine-pitch soldering
Add to cart