We use cookies in order to personalize your site experience.
Shop
7485 4-bit Magnitude Comparator
25,00 EGP- Compares two 4-bit binary numbers (A and B)
- Provides outputs for A > B, A = B, and A < B
- Operates with standard TTL logic levels
- Cascadable for comparing larger bit-width numbers
- Commonly used in digital sorting, arithmetic, and decision circuits
7486 Quad EXCLUSIVE-OR Gate
14,00 EGP- Contains four independent 2-input XOR gates
- Operates on standard TTL logic levels
- Used for parity checking, bitwise addition, and logic functions
- Fast switching speed with low power consumption
- Widely used in digital circuits and signal processing
8-Channel Bi-Directional Logic Level Converter TXS0108E for Arduino
65,00 EGP- 8 Channels: Supports 8 data lines for versatile applications.
- Bi-Directional: Handles signal conversion in both directions.
- Wide Voltage Range: Compatible with 1.2V to 5.5V logic levels.
- Automatic Direction Detection: No need for manual configuration.
- Compact Design: Ideal for space-constrained projects.
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
A2212 1000KV Brushless Motor Kit – Efficient Power for RC Aircraft & DIY Projects
400,00 EGP-
1000KV Rating: Balanced RPM for stable, efficient flight
-
Complete Kit: Includes motor, X-mount, prop adapter, and screws
-
Lightweight: Weighs ~50g, perfect for park flyers and gliders
-
Durable Build: Features ball bearings, strong magnets, and quality windings
-
Easy Setup: Pre-soldered 3.5mm connectors for plug-and-play
-
Versatile Use: Ideal for RC planes, drones, gliders, and robotics
-
Budget-Friendly: Great value for beginners and DIY projects
AC/DC Power Adapter (5V 1A)
50,00 EGP- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 1A.
- Input Plug: 2-Pin EU type.
- Output Plug: 5.5mm DC plug.
AMS1117 3.3V Voltage Regulator Power Module – 800mA Output for Arduino & Microcontrollers
20,00 EGPCompact 3.3V voltage regulator module based on the AMS1117 IC. Provides a stable 3.3V output up to 800mA, perfect for powering Arduino, ESP32, Raspberry Pi, and other 3.3V electronics.
✅ 3.3V regulated output
✅ Supports up to 800mA current
✅ Compact and easy-to-integrate module
✅ Ideal for microcontrollers and low-power electronics
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
Arduino mega 2560 ATmega2560-16AU Board
1.400,00 EGP✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects
Arduino MEGA 2560 R3 with CH340 Chip
1.250,00 EGP- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano Cable – USB 2.0 A to USB 2.0 Mini B
20,00 EGP- Compatible with Arduino Nano V3 (Mini USB port)
- USB 2.0 A to Mini-B 5-pin connector
- Supports data transfer rates up to 480 Mbps
- Compact 30cm length – perfect for desktop setups
- Plug-and-play; no drivers needed
Arduino Nano Type-C USB
250,00 EGP- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
