We use cookies in order to personalize your site experience.
Shop
Raspberry Pi Camera Module 5MP for Pi 3/4 B+ (1080p/720p)
300,00 EGP- 5MP OV5647 CMOS sensor for high-quality imaging
- Captures up to 2592×1944 still images
- Supports 1080p30, 720p60, and VGA90fps video recording
- Connects via 15-pin CSI interface (ribbon cable included)
- Compatible with Raspberry Pi 2, 3, 3B+, 4
- Ideal for robot vision, surveillance, facial recognition
- Fully supported by Raspberry Pi OS camera libraries
RDM6300 RFID Reader Module – 125KHZ
175,00 EGP- 125KHz RFID reader with built-in antenna
- Reads EM4100 compatible cards/tags
- UART output (9600 baud rate)
- 3.3V–5V operating voltage
- Reading range: up to 10cm
Recording Voice Module ISD1820 + Speaker
75,00 EGP-
Records up to 10 seconds of audio
-
Built-in microphone & speaker included
-
Supports multiple playback modes
-
Non-volatile flash memory
-
Compatible with Arduino and DIY projects
Reed Switch (Magnetic Switch) – Normally Open (N.O.)
15,00 EGP- Normally Open (N.O.) Contact closes in presence of magnetic field
- Simple 2-Pin Design for easy circuit integration
- Fast Response Time with no physical contact required
- Compact Glass Tube Construction for durability
- Ideal for Door Sensors, Security Systems, and Automation Projects
RFID (Radio Frequency ID) Cards
10,00 EGP- 125KHz frequency – compatible with EM4100/EM4200 systems
- 64-bit unique ID – permanently preprogrammed, read-only
- Standard credit card size – ISO/IEC 7810 compliant
- Durable PVC material – resistant to wear and bending
- Plug & play – works with most RFID readers and Arduino kits
- Wide temperature range – from -40°C to +85°C
RFID Tag (125KHz)
10,00 EGP- 125KHz operating frequency – compatible with EM4100/EM4200 readers
- Unique 64-bit ID – read-only and securely preprogrammed
- Key fob design – with keyring hole for easy carrying
- Durable and waterproof – built for harsh environments
- Plug & play – works with Arduino RFID kits and readers
- Wide temp range – operates from -40°C to +85°C
RP360-ST-15250 DC Motor 12V 6260RPM
100,00 EGP- Rated for 12V DC – efficient for standard power supplies
- High-speed: 6260 RPM (no load) – ideal for fast-rotating tasks
- Compact design – ~15mm diameter fits tight enclosures
- Brushed DC motor – simple and reliable operation
- Face-mount holes – easy to install in various projects
- Low no-load current – ~<200mA for efficient operation
- Perfect for robotics & DIY – use in toys, pumps, fans, and gadgets
- Durable construction – made for continuous use
Servo Motor PTZ Pan/Tilt Bracket Platform with Anti-Vibration Design
40,00 EGP- Dual-axis control – supports pan & tilt movement
- Servo-compatible – fits SG90, MG90, MG90S micro servos
- Anti-vibration design – improves stability for cameras/sensors
- Lightweight & durable – ideal for mobile robotics and drones
- Easy assembly – comes with pre-drilled holes and mounting hardware
- Versatile use – great for face tracking, surveillance, and object following
- Modular structure – integrates smoothly into Arduino/IoT setups
- Perfect for automation – mounts sensors, lasers, or mini cameras with ease
Servo Motor TowerPro MG995
220,00 EGP- High torque and fast response
- Metal gear construction for durability
- Accurate positioning with excellent holding power
- Compatible with most RC and microcontroller platforms
- Plug-and-play with standard 3-wire servo interface
Soil Moisture Meter Sensor for Arduino
75,00 EGP- Measures soil moisture level via resistance changes
- Provides analog output compatible with Arduino and other microcontrollers
- Simple and low-cost sensor for plant and agriculture projects
- Easy to use with adjustable sensitivity
- Helps automate irrigation and monitor plant health
- Operates at 3.3V to 5V power supply
Solar cell 2.5V
40,00 EGP- 2.5V Output Voltage suitable for low-power electronics
- Compact Size ideal for small DIY and educational projects
- Environmentally Friendly renewable energy source
- Easy to Connect with solder pads or wires
- Perfect for Charging Small Batteries or Powering Microcontrollers
Solar Cell Panel – 18V 5W Polycrystalline
325,00 EGP- 18V Output Voltage suitable for small electronics and charging
- 5W Power Rating for efficient energy conversion
- Polycrystalline Silicon for durability and stable performance
- Compact and Lightweight for portable solar applications
- Ideal for DIY Solar Projects, Lighting, and Battery Charging
Solder Wire 70/30 0.6mm (Taiwan)
800,00 EGP- 70% tin / 30% lead alloy for strong, reliable joints
- 0.6mm diameter – ideal for fine electronic work
- Rosin-core flux for smooth solder flow
- Melting point: ~183–190°C
- Minimal spatter & oxidation for cleaner soldering
- Made in Taiwan for consistent quality
SPDT Micro Limit Switch with 27mm Long Arm Lever
20,00 EGP- SPDT contacts – supports both NO & NC configurations
- 27mm metal lever – sensitive and extended actuation reach
- Compact micro switch – fits tight spaces in builds
- Durable design – rated for over 1 million mechanical cycles
- Solderable pins – easy electrical integration
- Great for automation – used in CNC, 3D printers, robots, etc.
- Standard mounting holes – quick and secure installation
- Voltage range – supports 5V to 250V AC/DC (model dependent)
ST-Link V2 Programmer for STM8/STM32
Original price was: 290,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.-
Supports SWD protocol for STM32 microcontrollers
-
Supports SWIM protocol for STM8 microcontrollers
-
USB interface for easy PC connectivity
-
Compatible with STM32CubeIDE, STVP, ST-Link Utility, Keil, IAR
-
Firmware upgradable for future updates
-
LED status indicator for operation feedback
-
Includes Dupont jumper wires for flexible connections
Stainless Steel Straight Tweezer TS-10
15,00 EGP-
Precision Straight Tips ideal for gripping small components
-
Durable Stainless Steel Construction resists rust and maintains strength
-
Non-Magnetic & Non-Acidic Finish suitable for electronics and lab work
-
Ergonomic Design with tension-balanced arms for steady handling
-
Perfect for SMD Work, Jewelry Making, Model Building, and Delicate Tasks
Stainless Steel Tweezers Set TS-9803 (3 PCS)
60,00 EGP- 3-piece precision tweezer set
- High-quality stainless steel construction
- Anti-static and corrosion-resistant
- Fine tips for detailed work
- Ideal for electronics, crafts, and repairs
Stepper Motor NEMA 17 (used)
100,00 EGP- Standard NEMA 17 frame for broad compatibility
- 1.8° step angle (200 steps/rev) for precise control
- High torque (~40–50 N·cm, model dependent)
- Bipolar 4-wire design for reliable performance
- Tested & fully functional used unit – minor cosmetic wear
- Ideal for 3D printers, CNC, robotics, and automation
TCRT 5000 Dual Channel Line Tracking Sensor Module
40,00 EGP- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
