We use cookies in order to personalize your site experience.
Shop
Micro Servo SG90 – 360 Degrees, 1.8 kg.cm, Plastic Gears
100,00 EGP- Full 360° Rotation for applications like small robots, RC wheels, and continuous motion projects.
- Compact & Lightweight design, perfect for tight spaces and lightweight builds.
- Torque of ~1.8 kg·cm at 6 V, suitable for light-duty tasks.
- Plastic Gears & Durable Shell: Economical yet reliable for hobbyist use.
- Standard 5–6 V Input compatible with most microcontroller setups (Arduino, Raspberry Pi).
- Quick, Responsive Control via PWM for smooth motion and positioning.
Microphone 9*7mm
7,00 EGP- Low noise
- Low power consumption
- Frequency Range: 50 – 20KHz
- Microphone sensitivity 56 – 58DB
- Multi-Channel
Mini 5A PWM DC Motor Speed Controller – 3V-35V, 90W Max, LED Dimmer
85,00 EGP- Input Voltage Range: 3V to 35V DC
- Max Output Power: Up to 90W
- Current Capacity: Up to 5A continuous
- PWM Control for precise speed and brightness adjustment
- Compact Design suitable for DC motors, fans, and LED dimming projects
Mini USB LED Lamp – Ultra-Thin & Lightweight for Camping
25,00 EGP- Ultra-thin & ultra-lightweight portable USB lamp
- Powered via standard 5V USB (mobile power, PC, laptop, etc.)
- Features 3× 2835 SMD LEDs, 0.2W ultra-low power
- High luminous efficiency with low heat output
- Working current: ~40mA – long-lasting & energy-saving
- Fits in a wallet or keychain – perfect for travel or camping
- One 5000mAh power bank can light it for ~100 hours
- Ideal for night reading, emergencies, or minimalist lighting setups
MOC3063 Zero-Crossing Optocoupler – 600V Triac Driver for Safe AC Load Control
15,00 EGP- Zero-Crossing Detection – Ensures low-noise switching and reduced EMI
- 600V Peak Voltage Handling – Ideal for switching high-voltage AC loads
- Low Trigger Current – Operates with typical 10mA LED current
- Optical Isolation – Withstands up to 5300V RMS between input and output
- Safe AC Switching – Protects microcontrollers and PLCs from AC surges
- Compact DIP-6 Package – Easy PCB integration and through-hole mounting
- Reliable Load Control – Perfect for lamps, motors, heaters, and industrial systems
- Wide Operating Range – -40°C to +100°C for industrial-grade environments
Mounting for DC Motor JGA25-370-CE 3D Printed
45,00 EGP-
Designed for 25mm JGA25-370-CE gear motors
-
High-quality PLA/PETG 3D printed construction
-
Pre-drilled 3mm mounting holes
-
Stable, low-profile design (~20mm height)
-
Easy alignment using motor faceplate and side screws
-
Ideal for robotics, pan-tilt, or DIY mechanical projects
MP3-TF-16P SD Card MP3 Module with Serial Port
150,00 EGP- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
MPU-9250 9-DOF IMU Sensor Module – 3-Axis Gyroscope, 3-Axis Accelerometer & 3-Axis Magnetometer (I2C/SPI Interface)
725,00 EGPCompact 9-axis motion tracking module featuring a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer. The MPU-9250 delivers accurate orientation, acceleration, and angular velocity data – ideal for drones, robotics, navigation, and motion-controlled projects.
✅ High accuracy 9-DOF tracking
✅ Low power consumption
✅ I2C/SPI communication
✅ Built-in Digital Motion Processor (DMP)
MPU9250 9-Axis Attitude Gyro Accelerometer Magnetometer Sensor Module
550,00 EGP- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
MQ-135 Air Quality/Gas Detector Sensor Module For Arduino
100,00 EGP- Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
- Provides analog and digital outputs
- Operates at 5V DC
- Adjustable sensitivity via onboard potentiometer
- Requires preheating (~24 hours) for accurate readings
- Compact and easy to integrate
MQ-5 Gas Sensor Module
80,00 EGP- Detects LPG, methane, natural gas, and propane
- Dual output: analog and digital signals
- Operates at 5V with low power consumption
- Adjustable sensitivity via onboard potentiometer
- Fast response and recovery time
- Compact and easy to integrate
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
75,00 EGP- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
Multicolor 10 pin Dupont Flat Ribbon Cable (1 Meter)
25,00 EGP-
10 Individual Jumper Leads in a flat, ribbon format with 2.54 mm pitch
-
One-Meter Length for flexible routing in electronics projects
-
Multicolor Wires for easy signal identification and organization
-
Female-to-Female Connectors for quick plug-and-play with headers
-
Compatible with Breadboards & Microcontrollers like Arduino, Raspberry Pi
NJK-5002C Hall Effect Sensor – NPN NO 3-Wire Magnet | Arduino Compatible
245,00 EGP- NPN Normally Open (NO) magnetic switch
- 3-wire connection: VCC, GND, Output
- Wide voltage range: 4.5V–30V DC
- Built-in LED indicator for magnetic detection
- Fast, non-contact sensing
- Compatible with Arduino and other microcontrollers
- Durable and compact M12 threaded design
NRF24L01 Wireless Module With Antenna
325,00 EGP- 2.4GHz transceiver for wireless data
- Long range with external antenna
- Low power, SPI interface
- Ideal for IoT, Arduino, wireless sensors
ON/OFF PCB Switch (6 Pin)
5,00 EGP- 6-pin configuration for secure PCB mounting
- Slim, compact build ideal for confined layouts
- Durable materials ensure long-lasting operation
- Simple installation across various circuit types
- Perfect for prototypes, gadgets, and home electronics
Optical Dust Sensor with Cable – Smoke
350,00 EGP- Infrared optical sensing for accurate particle detection
- Detects dust, smoke, and pollen in indoor environments
- Fast response time (<1 second) and low power use
- Compact build with lightweight materials
- Plug-and-play with included 5-pin interface cable
- Compatible with Arduino, ESP32, STM32, Raspberry Pi
PAM8403 Mini 5V Digital Amplifier Board with Switch Potentiometer can be USB Powered
55,00 EGP-
Based on PAM8403 digital audio amplifier chip for high-fidelity stereo output
-
3W + 3W stereo output with low distortion and efficient power usage
-
Built-in rotary potentiometer with switch for easy volume control and power on/off
-
Compact design: 30mm x 22mm PCB size, 16mm height when assembled
-
Upgraded 470µF power filter capacitor for improved audio clarity and stability
-
Suitable for portable, battery-powered, or DIY audio projects
-
Low power operation (5V) – ideal for long-term stable use
⚠️ Note: Supply voltage must be ≤ 5.5V. Reverse polarity will damage the board.
