We use cookies in order to personalize your site experience.
Shop
CNC V3 Shield with 4 A4988 Drivers
125,00 EGP- Four A4988 Drivers: Reliable stepper motor control with up to 2A per coil.
- Microstepping Support: Up to 16 microsteps for smooth and precise motion.
- Adjustable Current Limit: Fine-tune motor performance and protection.
- Heat Sink Compatible: Provisions for heat sinks to manage temperature.
- Arduino Compatibility: Works with Arduino Uno, Nano, and other boards.
- Clear Connections: Easily labeled for simple wiring and setup.
- GRBL Firmware Support: Compatible with popular CNC software.
Creality Ender 3 Silent Mainboard V4.2.7 – 32-Bit Upgrade Board
3.000,00 EGP-
32‑Bit Processor for faster, smoother printing
-
TMC2225 Silent Stepper Drivers for ultra-quiet motor operation
-
Easy Firmware Updates via microSD card
-
BLTouch/CR Touch Support for auto bed leveling
-
Enhanced Safety Features with thermal protection
-
Drop-in Replacement for Ender-3, Ender-3 Pro, Ender-3 V2, and Ender-5
DB3 – Bi Directional Diac
3,00 EGP- Bidirectional Triggering – Conducts in both AC half-cycles
- Breakover Voltage: 30V–40V – Switches ON when voltage exceeds threshold
- Low Holding Current (~5mA) – Turns OFF automatically when current drops
- Reliable TRIAC Trigger – Commonly used in dimmers, fan regulators, and motor control
- Compact DO-35 Package – Easy to integrate in tight PCB layouts
- 2A Pulse Current Rating – Suitable for low to medium power switching
- Stable and Predictable Switching – Ensures consistent TRIAC triggering
DC 5V to DC 12V USB Voltage Step-Up Converter Cable with DC Jack 5.5 x 2.1mm
75,00 EGP- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Color: BLACK
- Input / Output Current: Maximum Input 0.6
- Easier for installation save time and money
- Easy to use.
DC Geared Motor Dual Shaft 3:12VDC 450RPM
30,00 EGP- Dual-shaft design for wheels, pulleys, or encoders
- High torque with built-in gearbox
- Smooth operation from 3V to 12V DC
- ~450 RPM at 12V for balanced speed and power
- Compact size for easy project integration
- Ideal for robots, automation, and DIY mechanisms
DC Input Module 5V with DC Jack and Switch for Breadboard
40,00 EGP-
Accepts 5V DC input via standard 5.5×2.1mm barrel jack
-
Built-in ON/OFF toggle switch for power control
-
Plugs directly into standard 400- or 830-point breadboards
-
Provides regulated 5V output to breadboard power rails
-
Compact and plug-and-play design for quick setup
-
Ideal for Arduino, ESP, sensors, and prototyping applications
DC-DC Boster MT3608 3V~28Vdc Adjustable Step-Up Converter Module 2A Type C USB
40,00 EGP-
Boosts low DC voltage to higher adjustable output
-
USB Type-C input for easy connectivity
-
Compact and lightweight module
-
High efficiency and stable performance
-
Built-in over-temperature and short-circuit protection
-
Ideal for battery-powered projects and portable electronics
DC-DC Step-Up Power Converter Module XL6009
65,00 EGP- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
Desoldering Pump
45,00 EGP-
Efficient manual solder removal for electronics
-
Spring-loaded plunger for quick operation
-
Durable plastic or aluminum body (model dependent)
-
Compact and lightweight handheld design
-
Anti-static safe – suitable for sensitive components
-
Reusable and easy to clean
-
Ideal for DIY repair, prototyping, and soldering practice
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
