We use cookies in order to personalize your site experience.
Shop
LM2596S DC-DC Step-Down Power Supply with SMD LED Indicator
65,00 EGP- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
LM35DZ Temperature Sensor
75,00 EGP- 🎯 Calibrated in Celsius (°C)
- 📏 10.0 mV/°C linear output
- ✅ ±0.5°C accuracy at 25°C
- 🔋 Operating voltage: 4V–30V
- 🔌 Ultra-low current: <60 µA
- 🔥 Low self-heating: 0.08°C
- 🧪 Minimal non-linearity: 0.25°C
- 📤 Low output impedance: 0.1Ω
LM555 Single Precision Timers
5,00 EGP- ⏲️ Timers and Delay Circuits
- 💡 LED Flashers and Blinkers
- 📶 Pulse Width Modulation (PWM)
- 📟 Tone Generation
- 🔄 Sequential Timing Circuits
- 🚨 Alarm Systems
- 🔁 Oscillators and Frequency Generators
Load Cell Sensor 10Kg
125,00 EGP- Measures weight/force up to 10 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
Load Cell Sensor 1Kg
105,00 EGP- Measures weight/force up to 1 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
Load Cell Sensor 5Kg
115,00 EGP- Measures weight/force up to 5 kg with high precision
- Uses strain gauge technology with 4-wire Wheatstone bridge
- Made from durable aluminum alloy for reliable performance
- Easy to interface with HX711 24-bit ADC module for Arduino
- Operates on 5-10V driving voltage
- Compact design, simple installation with screw mount
- Ideal for electronic weighing scales and force measurement applications
M/F – 10cm Male to Female 1 Jumper Wire
0,75 EGP- Male-to-Female connectors – perfect for bridging modules and dev boards
- 10cm wire length – ideal for compact circuit setups
- Standard 2.54mm pitch – fits breadboards and header pins
- Flexible PVC insulation – resists wear and tear
- Copper conductor – ensures stable and strong signal transfer
- Reusable and solder-free – quick plug/unplug connections
- Color-coded (may vary) – for easy wiring identification
- Great for Arduino, Raspberry Pi, ESP32, and sensor projects
M/F – 30cm Male to Female 1 Jumper Wire
1,50 EGP- 📏 30cm length – ideal for extended circuits and flexible layouts
- 🔗 Male-to-Female ends – bridges male pins to female headers
- ⚙️ Standard 2.54mm pitch – fits Arduino, Raspberry Pi, ESP32, and more
- 🔁 Durable, reusable design – perfect for testing and prototyping
- 🔌 Plug-and-play – no soldering required
- 🧪 Flexible PVC insulation with copper conductors
M/M – 30cm Male to Male 1 Jumper Wire
1,50 EGP- 📏 30cm extended length – great for wide or modular circuit layouts
- 🔗 Male-to-Male connectors – fits female headers and breadboards
- ⚙️ 2.54mm standard pitch – compatible with Arduino, Raspberry Pi, ESP32, and more
- 🔁 Durable, flexible, and reusable – ideal for frequent prototyping
- 🔌 Easy plug-in connections – no soldering required
- 🧪 Flexible PVC insulation with copper/tinned copper core
M3mm x 3cm Screw with Nuts
1,00 EGP- Size: M3mm diameter, 3cm length, suitable for medium-sized assemblies and projects.
- Complete Set: Includes matching nuts for secure and reliable fastening.
- Durable: Made from high-quality material for strength and long-lasting use.
- Versatile: Ideal for use in electronics, mechanical projects, and lightweight assemblies.
- Easy to Install: Simple to use for secure fastening in various applications.
Male 2.1*5.5mm for DC Power Jack Adapter Connector Plug
7,00 EGP- Universal Compatibility – 2.1mm (ID) × 5.5mm (OD) fits most DC jacks
- Tool-Free Wiring – Screw or solder terminals for quick connections
- Robust Build – Durable ABS housing and nickel-plated contacts
- High Current Capacity – Supports up to 5A (with proper wiring)
- Ideal for DIY Projects – Perfect for Arduino, Raspberry Pi, CCTV, and LED setups
- Compact & Reliable – Ensures secure power delivery in small spaces
MAX7219 8X8 Dot LED Matrix Display Module
140,00 EGP- 8×8 Red LED Matrix driven by MAX7219 chip
- Serial Interface (SPI Compatible) for easy microcontroller integration
- Cascadable Design to chain multiple modules
- Adjustable Brightness Control via software
- Ideal for Scrolling Text, Symbols, and Animations
MAX98357A I²S 3W Class D Amplifier DAC Audio Module
120,00 EGPCompact I²S audio amplifier module based on the MAX98357A chip. Delivers 3W output with high efficiency and low distortion. Ideal for Arduino, ESP32, Raspberry Pi, and other microcontroller audio projects.
✅ 3W Class D audio output
✅ Direct I²S digital input
✅ Low power consumption and high efficiency
✅ Compact, easy-to-use module
MB102 830 Points breadboard
40,00 EGP- 830 solderless connection points
- Compatible with resistors, LEDs, transistors, capacitors, and more
- Color-coded grid for easy component placement
- Durable phosphor bronze, nickel-plated spring clips
- Supports wire sizes 20-29 AWG
- Slightly concave base for stability
MCP2515 CAN Bus Module with TJA1050 Receiver – SPI Interface for Arduino, ESP32 & Microcontrollers
180,00 EGPReliable CAN Bus communication module using the MCP2515 controller and TJA1050 transceiver. Perfect for automotive, industrial, and robotics projects requiring Controller Area Network (CAN) protocol.
✅ MCP2515 CAN controller with SPI interface
✅ TJA1050 CAN transceiver for robust communication
✅ Compatible with Arduino, ESP32, STM32
✅ Supports high-speed CAN up to 1 Mbps
Metal Ball Caster Wheel for Small Robotic Car
45,00 EGP- Durable metal construction for long-lasting use
- Smooth 360° omni-directional movement
- Ideal for small robotic car platforms
- Compact and lightweight design
- Easy to mount on various chassis types
MG996R Digital High Torque Servo Motor
225,00 EGP- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Half-Metal gear
- Dead band width: 1us
- Wire length: 32cm
MH-ET LIVE MAX30100 Heart Rate Oximetry Sensor Module Heart Rate Sensor Breakout Ultra-Low Power
110,00 EGP-
Combines pulse oximeter and heart rate sensor in one module
-
Based on the MAX30100 integrated circuit
-
Communicates via I2C interface (address: 0x57)
-
Ultra-low power consumption – ideal for wearable and battery-powered applications
-
Includes red & infrared LEDs, photodetector, and ambient light rejection circuitry
-
Compatible with Arduino, ESP32, STM32, Raspberry Pi, and other platforms
-
Compact size – easy to embed in health monitoring devices
Micro Limit Switch SM Short Lever 3A 20×6 mm
8,00 EGP-
Compact Form Factor (20 × 6 mm) with a short actuator lever
-
Robust Contact Rating: Handles up to 3 A at 250 VAC / 30 VDC
-
Snap-Action Mechanism: Offers fast, reliable switching
-
Durable Build: Long lifespan with metal internal contacts
-
Easy Mounting: Ideal for mechanical end-stops, safety gates, and automation systems
Micro Servo SG90 – 0 to 180 Degrees, 1.8 kg.cm, Plastic Gears
95,00 EGP- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
