We use cookies in order to personalize your site experience.
Shop
1.3 Inch I2C IIC 4 pin OLED Display Module
Original price was: 320,00 EGP.230,00 EGPCurrent price is: 230,00 EGP.-
1.3″ OLED screen with 128×64 resolution
-
I2C interface – requires only 2 data pins (SDA, SCL)
-
White or blue pixels on black background (batch-dependent)
-
Ultra-low power consumption for energy-efficient projects
-
Wide viewing angles and high contrast display
-
Based on SSD1306 controller – compatible with U8g2 and Adafruit libraries
-
3.3V to 5V operating voltage – works with most microcontrollers
-
Compact design with mounting holes for easy installation
2.4 inch LCD Display TFT Touch Screen Shield 240×320 18-bit SPFD5408 Display Controller Arduino UNO R3/Mega2560
Original price was: 550,00 EGP.430,00 EGPCurrent price is: 430,00 EGP.- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
3.5″ inch ili9486 TFT Touch Shield LCD Module 480×320 for arduino uno mega2560
Original price was: 1.100,00 EGP.700,00 EGPCurrent price is: 700,00 EGP.- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
3D Printing the Robot Arm
Original price was: 2.500,00 EGP.2.000,00 EGPCurrent price is: 2.000,00 EGP.- 5 Degrees of Freedom (DOF)
- Includes 3x MG996R high-torque servos
- Includes 3x SG90 micro servos
- Durable and lightweight 3D printed structure
- Compatible with Arduino, ESP32, Raspberry Pi
- Easy to assemble and customize
- Ideal for pick-and-place and educational projects
4 WD Double Layer Smart Car Chassis Kit
Original price was: 475,00 EGP.420,00 EGPCurrent price is: 420,00 EGP.- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
4-Pin Light-Dependent Photosensitive Sensor LDR Module
Original price was: 40,00 EGP.35,00 EGPCurrent price is: 35,00 EGP.- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
4WD RC car steering wheel not encolude component
Original price was: 450,00 EGP.380,00 EGPCurrent price is: 380,00 EGP.
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
Original price was: 150,00 EGP.120,00 EGPCurrent price is: 120,00 EGP.✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package
Arduino MEGA 2560 R3 with CH340 Chip
Original price was: 1.250,00 EGP.1.200,00 EGPCurrent price is: 1.200,00 EGP.- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano V3.0 CH340 Chip Board，Atmega328P
Original price was: 250,00 EGP.210,00 EGPCurrent price is: 210,00 EGP.- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino UNO R4 Minima
Original price was: 850,00 EGP.750,00 EGPCurrent price is: 750,00 EGP.- Same form factor as UNO R3
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
Arduino UNO R4 WiFi
Original price was: 1.400,00 EGP.1.100,00 EGPCurrent price is: 1.100,00 EGP.- Same form factor as UNO R3
- Inbuilt Wi-Fi and Bluetooth
- Onboard 12×8 LED Matrix
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
AS608 Optical Fingerprint Sensor Module
Original price was: 1.100,00 EGP.850,00 EGPCurrent price is: 850,00 EGP.- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
BT136-600E Logic Level Triac – 600V 4A
Original price was: 13,00 EGP.10,00 EGPCurrent price is: 10,00 EGP.- Logic-Level Control – Triggered by 3–5V signals, ideal for microcontrollers
- 600V Voltage Rating – Suitable for high-voltage AC load switching
- 4A RMS Current – Handles moderate loads like lamps, motors, and appliances
- Low Gate Trigger Current – 5mA typical, works directly with Arduino, ESP, etc.
- TO-220 Package – Easy to mount and thermally efficient
- Low On-State Voltage Drop – 1.7V max ensures efficient operation
- Reliable Performance – Operates from -40°C to +125°C
- Perfect for DIY & Automation – Great for dimmers, HVAC, smart lighting
DIY Acrylic Robot Arm Kit (not-including Servo and Board)
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Material: Acrylic
- Affordable 4-DOF manipulators.
- Highly versatile mechanical parts.
- Wood board laser cutting with precision.
- Easy to assemble.
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Original price was: 550,00 EGP.525,00 EGPCurrent price is: 525,00 EGP.- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
ESP32 Development Board CH9102X WiFi+Bluetooth
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
- Frequency: 2.4 GHz.
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Gripper – Robot Mechanical Arm Aluminum Metal Claws
Original price was: 370,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm
HC-05 Bluetooth Module with 6 Pins and Integrated Button
Original price was: 250,00 EGP.225,00 EGPCurrent price is: 225,00 EGP.- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
