We use cookies in order to personalize your site experience.
Sensors
12mm 12528 LDR，10-20K
12,00 EGP✅ 12mm CdS photoresistor
✅ 10k–20k Ω resistance in dark
✅ Sensitive to visible light (peak ~520 nm)
✅ Fast response time (~10 ms)
✅ Ideal for light sensing and automation
3 Channel Path Tracing Module
170,00 EGP- Integrated 3 IR sensors for accurate line/path detection
- Designed for black/white line tracking applications
- Output: Digital signal (HIGH/LOW) for each channel
- Adjustable sensitivity via onboard potentiometers
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Suitable for robotics, smart cars, and AGVs
- Simple 3-pin or 4-pin interface for easy wiring
- Operating Voltage: 3.3V–5V
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGP✅ Compact 4-pin module with digital & analog output
✅ Adjustable sensitivity for varied flame sizes
✅ Compatible with Arduino, Raspberry Pi, and similar boards
✅ Fast and reliable flame detection
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
Capacitive Soil Moisture Sensor
85,00 EGP- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
DIY Metal Detector Kit: DC 3V-5V, 60mm Non-Contact Sensor Module
150,00 EGP-
Complete DIY kit for building a basic metal detector
-
Includes all required electronic components and PCB
-
Built-in detection coil integrated on the high-quality PCB
-
Component values and positions clearly marked on the board
-
Ideal for learning electronics, experimentation, and STEM projects
-
Suitable for applications like security checks, object detection, and fun DIY builds
-
Compact and easy to assemble – great for beginners and hobbyists
DS18B20 Temperature Sensor
45,00 EGP- Digital temperature sensor with 1-wire interface
- Measures temperatures from –55°C to +125°C
- High accuracy ±0.5°C over a wide range
- Requires only one data line for communication
- Can connect multiple sensors on a single bus
- Waterproof versions available for outdoor use
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
275,00 EGP- Adjustable sensing range: 3 cm to 80 cm
- Digital NPN output (normally open)
- Operates at 5V DC with low current consumption
- Fast response time (<2 ms)
- Compact and easy to install
- Ideal for obstacle detection and automation applications
