We use cookies in order to personalize your site experience.
Electronics Engineering Careers
Where circuit design meets innovation, and hardware dreams become reality. Join our electronics engineering team.
Our Engineering Values
The principles that guide our hardware development and define our engineering excellence
Hardware Excellence
We design robust, reliable electronics that push the boundaries of what's possible in hardware innovation.
Innovation Driven
We constantly push boundaries in electronics design, from PCB layout to embedded systems development.
Precision Engineering
We work with meticulous attention to detail, ensuring every component and connection meets the highest standards.
Electronics Engineering Positions
Ready to design the future? Check out our current electronics engineering opportunities
Electronics Sales Engineer
Sales Engineering
Hybrid
Full-time
Bridge the gap between technical expertise and customer solutions. Provide technical pre-sales support and demonstrate how our electronics products solve client challenges.
Technical Sales
Customer Demos
Solution Architecture
RFPs
PCB Design Engineer
Hardware Design
On-site
Full-time
Design and develop complex printed circuit boards for cutting-edge electronics products. Work with schematic capture, layout, and manufacturing preparation.
Altium Designer
Eagle
KiCad
Proteus
Signal Integrity
PCB Layout
3D Printing & Mechanical Design Engineer
Mechanical Engineering
On-site
Full-time
Design and prototype mechanical components and enclosures for electronic products. Specialize in 3D printing technologies and rapid prototyping methodologies.
SolidWorks
3D Printing
Rapid Prototyping
CAD Design
Enclosure Design
FDM/SLA Printing
Embedded Systems Engineer
Embedded Systems
Hybrid
Full-time
Develop firmware and low-level software for microcontroller-based systems. Work on real-time embedded applications and IoT device development.
C/C++
ARM Cortex
RTOS
IoT
Microcontrollers
Firmware
Engineering Benefits
We support our engineering team with resources and benefits that enable innovation
State-of-the-Art Lab
Access to advanced electronics lab with oscilloscopes, spectrum analyzers, and prototyping equipment
3D Printing Farm
In-house 3D printing capabilities with multiple technologies for rapid prototyping
Training Budget
Annual budget for professional development, conferences, and advanced tool training
Latest Software
Full licenses for Altium, SolidWorks, and other professional engineering tools
Ready to Design the Future?
Passionate about electronics engineering but don't see the perfect role? We're always looking for talented engineers. Send us your portfolio and tell us about your hardware projects.
LED Resistor Calculator
How to Calculate LED Resistor
To calculate the appropriate resistor for an LED, we use Ohm's Law:
R = (Vsource - VLED) / ILED
Where:
- R: Required resistor value in ohms (Ω).
- Vsource: Voltage of the power supply in volts (V).
- VLED: Voltage required to operate the LED in volts (V).
- ILED: LED current in amperes (A).
Voltage and Current Values for 5mm LEDs
5mm LEDs have different voltage and current values depending on their color:
- Red LED: 1.8V - 2.2V, 20mA (0.02A).
- Yellow LED: 2.0V - 2.2V, 20mA (0.02A).
- Green LED: 2.0V - 3.2V, 20mA (0.02A).
- Blue LED: 3.0V - 3.5V, 20mA (0.02A).
- White LED: 3.0V - 3.5V, 20mA (0.02A).
Example Calculation
If you have a 9V power supply and use a red LED that requires 2V to operate and consumes 20mA (0.02A) of current, the resistor is calculated as follows:
R = (9V - 2V) / 0.02A = 7V / 0.02A = 350Ω
Conclusion
Using this method, you can determine the correct resistor to protect the LED and prevent excessive current from damaging it.
